When planning antenna placement, it might be necessary to build a free-standing tower for the antenna. Regulations and limitations define the height and location of these towers with respect to airports, runways, and airplane approach paths. These regulations are controlled by the FAA. In some circumstances, the tower installations must be approved by the FAA, registered with the FCC, or both. To ensure compliance, review the current FCC regulations regarding antenna structure .
Labels:
Microwave antenna
Blog Archive
-
▼
2009
(116)
-
▼
March
(45)
- Different layers of OSI model
- Data Communication
- Link Budget
- CDMA (Code Division Multiple Access)
- DAMA (Demand Assigned Multiple Access)
- PAMA (Pre-Assigned Multiple Access)
- FDMA (Frequency Division Multiple Access)
- TDMA (Time-division multiple access)
- Broadcast Network
- How VSAT Work
- VSAT Topology
- VSAT Services
- Specification
- Typical applications for VSAT networks
- Steps of VSAT installation
- VSAT networks provide
- VSAT (Very Small Aperture Terminal)
- Type of Satellite Service
- Satellite Communication
- satellite communication
- Wavelength
- Signal-to-noise ratio
- Bit Error Rate
- Waveguide
- Cable and Connector Loss
- Antenna efficiency
- Antenna Gain
- Free-Space Path Loss
- Receiver Sensitivity
- Calculating a Link Budget or Fade Margin
- Earth Bulge
- Minimum Antenna Height
- Fresnel Zone
- Tower Height
- Tower
- Best Location of Antenna Placement
- Antenna Polarization
- Types of antennas
- Types of antenna
- Antenna
- Co-Channel and Adjacent Channel Interference
- Control Cable
- Coaxial Cable
- Radio Links
- Microwave
-
▼
March
(45)
0 comments:
Post a Comment